| Roger Dodger Aviation helps you make your flight simulator the best it can be! |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| We help you make your flight simulator the best it can be! |
| "What is Expanded Polystyrene (EPS)?" See our EPS video The cockpit enclosure is covered with a skin of expanded polystyrene, ½” (1.3 cm) thick. Most people encounter EPS as white foam cups or plates or packing material for electronics. EPS is also a common insulating material found at many home improvement stores and sold in 4 foot by 8 foot sheets. EPS is not Styrofoam. The material we are using consists of a polystyrene core sandwiched between two thin layers of plastic. The thin plastic coating makes the material easy to work with and provides a good painting surface. EPS is flexible, but can break if bent too far. We show you in the video how to work with it. |
Copyright (c) 2004-2009 Roger Dodger Aviation, LLC All rights reserved Items sold by Roger Dodger Aviation, LLC are governed and protected by the copyright laws of the United States of America and international intellectual property agreements |
| "What is Extruded Polystyrene (XPS)?" See our XPS video Extruded Polystyrene (XPS) may also be used for the DIY project. XPS can appear blue or pink. The blue XPS is also known as Styrofoam, a trademark of the Dow chemical company. The pink XPS is Foamular, a trademark of Owens Corning. XPS is a common insulating material found at many home improvement stores and sold in 4 foot by 8 foot sheets. XPS is more sturdy than EPS, but it does not bend as well. |